Thomas Armstrong (Concrete Blocks) Ltd

Acoustic Performance of our Concrete Blocks

With an extensive range of block types available, Thomas Armstrong can offer effective, proven and cost-effective solutions to acoustic performance requirements whether it be achieving compliance with Building Regulations, Robust Details or higher-level performance criteria.

Requirements: Part E of the Building Regulations

The table below is extracted from Approved Document E1 (ADE) of the building regulations and shows the current performance values required of internal walls.

Thomas Armstrong Concrete Blocks Properties Table

Route to Compliance: Pre Completion Testing, PCT

PCT is intended to demonstrated compliance with requirement E1 of Approved Document E of the Building Regulations. This applies to dwellings and residential buildings. Approved Document E includes several example wall and floor constructions which, if constructed in accordance with the guidance, should achieve the acoustic performance in order to comply to the regulations. PCT must however be carried out to demonstrate compliance.

For large developments there is a sampling approach that can be used so that not every single separating wall or floor needs to be tested. The developer needs to liaise with their local building control who will determine the necessary sampling regime.

Route to Compliance: Robust Standard Details, RSD's

Robust Standard Details are a collection of various new-build separating wall and floor constructions which if registered and built in strict accordance with the detail (often referred to as a ‘pattern’) eliminates the need for PCT.

The principle behind the Robust Details approach is that each of these patterns have been extensively tested in real builds and have been shown to exceed the Building Regulation’s minimum requirements by at least 5dB. RSD constructions have been made as practical and as simple as possible and are being constantly updated and added to as requirements and regulations change.

In order to utilize the Robust Details approach, an application must be registered with Robust Details Limited and a fee paid. Further details can be found at www.robustdetails.com.

Our Medium Dense, Solid Dense and Airtec Aerated blocks are suitable for use with many Robust Detail patterns which is being updated and expanded year after year - please contact our Technical Department for further information.

Contact

General Enquiries

At Thomas Armstrong (Concrete Blocks) Ltd we pride ourselves on our high level of customer service across the company. Our friendly staff will be more than happy to help answer any questions you have relating to sales and our products as well as any technical advice you have. Please contact our local office (see offices) near you today!

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, and assist in our marketing efforts. View our Privacy Policy for more information.