These lightweight aggregate blocks are designed to offer the builder a low weight, load-bearing block with enhanced thermal properties suitable for a wide range of applications.
Ultralite blocks are manufactured to BS EN 771-3 and are ISO 9001 Quality Assured, ISO 14001 Environmentally Certified and hold BES 6001 ‘Excellent’.
Weighing less than 20kg, these high-quality aggregate blocks are manufactured from low density, quality aggregates and available in a range of sizes. These lightweight concrete blocks are only available in a ‘Standard’ texture finish providing an excellent surface for mortars, renders and plasters.
APPLICATIONS
KEY ADVANTAGES
GALLERY
DISCLAIMER
The block and texture images are intended for indicative purposes only and actual textures and shades may vary between manufacturing locations. Please contact your regional sales office for further information and sample blocks. We advise the construction of sample panels on site as masonry appearance cannot be appreciated from individual blocks.
UKCA CERTIFICATIONS
PROPERTY
REFERENCE
VALUES
Face Size (L x H)
Dimensional Tolerance
Gross Dry Density
Mean Compressive Strengths
Manufacturing Category
Thermal Conductivity (Protected Inner Leaf)
Thermal Conductivity (Exposed Outer Leaf)
Moisture Movement
Fire Resistance
Configuration
Available Texture Finish
BS EN 771-3
BS EN 772-16
BS EN 772-13
BS EN 772-1
BS EN 771-3
BS EN 1745
BS EN 1745
BS EN 772-14
BS EN 13501-1
BS EN 1996-1-1
440mm x 215mm
Category D1
950 - 1050 kg/m³
3.6 N/mm²
7.3 N/mm²
Category II
0.32 W/mK
0.34 W/mK
< 0.6 mm/m
Class A1 Reaction to Fire
Solid - Group 1
Standard
Available Widths
90mm, 100mm or 140mm
PROPERTY
BLOCK WIDTH
90mm
100mm
140mm
‘R’ Value
Walled Weight
Sound Reduction
Block Weight
0.36 m²k/W
86 kg/m²
42 Rw, dB
9.8 kg
0.40 m²k/W
96 kg/m²
43 Rw, dB
10.7 kg
0.56 m²k/W
134 kg/m²
46 Rw, dB
14.6 kg
Walled weight is for a single-leaf wall, plastered on both sides.
Sound Reduction Rw values are based on wall mass and assumes a plastered finish on both sides.
The concrete block weights quoted above are approximate and include the typical additional weight from the moisture content.
Fire resistance periods to BS EN 1996-1-2 for a single-leaf, non load-bearing plastered wall.
Fire Resistance
3 Hours
4 Hours
4 Hours
BLOCK WIDTH
BLOCKS PER PACK
m² PER PACK
90mm
100mm
8.0
7.2 or 9
80
72 or 90
Pack details may vary slightly between manufacturing locations. Always check details with your nearest sales office.
140mm
48 or 60
4.8 or 6
We are Part of the Thomas Armstrong Group